Important Information

The device is for indoor use only. To prevent fire or shock hazards, do not expose this unit to rain or moisture

To reduce the risk of electric shock, ensure the power cord (Ethernet cord) is unplugged from the PoE injector upon installation. To fully disengage power to the unit, disconnect the Ethernet cord from the PoE outlet.

Do not remove cover or back and refrain from opening the device. No user serviceable parts inside. Refer servicing to qualified service personnel. All warranty voids when tampering with the device or upon opening.

Only use specified quality Ethernet cables for PoE supply. Ensure cable installation has been conducted according to all applicable regulations and standards. QUMEA assumes no liability whatsoever for infrastructure faults or damage caused by improper installation.

Only use QUMEA certified mounting structures. Ensure mounting plate has been installed firmly prior to attaching the sensor. Improper mechanical attachment may cause harm.

The RADIQ-1 sensor attaches to a metal mounting plate using strong magnets. Ensure no magnetic parts are covering the mounting magnets prior to installation. Caution when handling the sensor, the strong magnets might attract metallic objects or attach to metallic structures potentially causing harm.

The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the ceiling/wall in accordance with the installation instructions